Product Search

    SEARCH NOW FOR ALL YOUR CONTROL TECHNIQUES SOLUTIONS

    Radwell is here to supply you with all your plant floor needs.

    Radwell is not an authorized distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.

    Filter Results
    Results 401-450 of 774.
    NIDEC CORP ES-2300RG

    NIDEC CORP

    CONTROL TECHNIQUES

    ES-2300RG

    DISCONTINUED BY MANUFACTURER,CONTROL DRIVE, 3 PHASE 4QUAD, ANALOG DC MOTOR, 240/480 VAC, 60 HZ
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$1,811.78
    CAN$1,811.78
    Repair Yours CAN$1,340.69
    NIDEC CORP 858905-00

    NIDEC CORP

    CONTROL TECHNIQUES

    858905-00

    PLC RACK, 6 SLOT, CHASSIS FOR PROGRAMMABLE MOTION CONTROLLER,
    ✓ IN STOCK!
    CAN$1,022.24 Buy Surplus As Low As CAN$730.17
    CAN$730.17
    Repair Yours CAN$505.08
    NIDEC CORP UNI3403

    NIDEC CORP

    CONTROL TECHNIQUES

    UNI3403

    DISCONTINUED BY MANUFACTURER, DRIVE, 46 AMP, 3 PHASE, 380-480 VAC, 22 KW, 30 HP, UNIDRIVE
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$12,728.34
    CAN$12,728.34
    Repair Yours CAN$3,600.00
    NIDEC CORP UNI1404

    NIDEC CORP

    CONTROL TECHNIQUES

    UNI1404

    DISCONTINUED BY MANUFACTURER, SERVO DRIVE, UNIDRIVE CLASSIC, SPEED CONTROLLER, 3 PHASE, 5.6-8.4 AMP, 380-480 VAC, 50/60 HZ, 2.2 KW / 3 HP, FOR ASYNCHRONOUS/SYNCHRONOUS MOTORS
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$4,655.22
    CAN$4,655.22
    Repair Yours CAN$1,428.00
    NIDEC CORP UNI1401

    NIDEC CORP

    CONTROL TECHNIQUES

    UNI1401

    DISCONTINUED BY MANUFACTURER, UNIDRIVE, 0.75 KW, INPUT: 3 AMP 3 PHASE 380/480 VAC 50/60 HZ, OUTPUT: 2.1 AMP 3 PHASE 380/480 VAC 50/60 HZ, OVERLOAD: 3.2 AMP FOR 60 SEC
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$3,180.08
    CAN$3,180.08
    Repair Yours CAN$1,188.00
    NIDEC CORP DXE-455WB

    NIDEC CORP

    CONTROL TECHNIQUES

    DXE-455WB

    DX 4" SERVO MOTOR, ENGLISH MOUNTING FL
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$3,123.82
    CAN$3,123.82
    Repair Yours CAN$2,169.64
    NIDEC CORP DXE-455CB

    NIDEC CORP

    CONTROL TECHNIQUES

    DXE-455CB

    DISCONTINUED BY MANUFACTURER, SERVO MOTOR, LINE REACTOR, LOW IMPEDANCE, NEMA1, 3000RPM, 850AMP, 230VAC, 55 LB-INCH TORQUE, 4INCH FRAME, ENGLISH MOUNT, BRAKE MOTOR/24VDC
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$2,796.80
    CAN$2,796.80
    Repair Yours CAN$1,906.87
    NIDEC CORP PCM-1

    NIDEC CORP

    CONTROL TECHNIQUES

    PCM-1

    DISCONTINUED BY MANUFACTURER, MOTION CONTROL DRIVE MODULE, PROGRAMMABLE, (960018-01)
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$591.12
    CAN$591.12
    Repair Yours CAN$366.73
    NIDEC CORP FX-316

    NIDEC CORP

    CONTROL TECHNIQUES

    FX-316

    DISCONTINUED BY MANUFACTURER, SERVO DRIVE, FOR DM-316C MOTOR, 4 AMP, 240 VAC, 3 PHASE, POSITIONING DRIVE, (960132-01)
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$2,819.84
    CAN$2,819.84
    Repair Yours CAN$1,548.00
    NIDEC CORP DXE-316W

    NIDEC CORP

    CONTROL TECHNIQUES

    DXE-316W

    DISCONTINUED BY MANUFACTURER, DX SERVO MOTOR, 230 VAC, 3 FRAME, ENGLISH MOUNTING FLANGE, 16 IN-LBS CONT. TORQUE, 4000 RPM MAX SPEED, CONNECTORIZED"
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$6,069.74
    CAN$6,069.74
    Repair Yours CAN$4,553.60
    NIDEC CORP DXA-205

    NIDEC CORP

    CONTROL TECHNIQUES

    DXA-205

    DISCONTINUED BY MANUFACTURER, SERVO DRIVE, POSITIONING, 120 VAC, 50/60 HZ INPUT, SHUNT FUSE, BRIDGE FUSE, PART NUMBER: 850023-01 / 960023-02
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$2,622.92
    CAN$2,622.92
    Repair Yours CAN$1,719.82
    NIDEC CORP CMDS-015

    NIDEC CORP

    CONTROL TECHNIQUES

    CMDS-015

    MOTOR POWER CABLE, MOLDED CONNECTOR ON MOTOR END, FERRULES ON DRIVE END, 15 FT LENGTH (2&3" NT, MG & MH MOTORS)
    ✓ IN STOCK!
    CAN$859.26 Buy Surplus As Low As CAN$506.91
    CAN$506.91
    NIDEC CORP 960480-05

    NIDEC CORP

    CONTROL TECHNIQUES

    960480-05

    DISCONTINUED BY MANUFACTURER, MDS POWER MODULE, 12.5 KW @ 480 VAC, 6.25 KW @ 240 VAC, WITH BACKPLANE, MODEL # MP-1250-00-000
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$1,656.48
    CAN$1,656.48
    Repair Yours CAN$1,061.59
    NIDEC CORP DXM-455C

    NIDEC CORP

    CONTROL TECHNIQUES

    DXM-455C

    DISCONTINUED BY MANUFACTURER, SERVO MOTOR, DX SERIES, 240 VAC, 4 FRAME, METRIC MOUNTING FLANGE, 55 IN-LBS CONT.TORQUE, 3000 RPM MAX SPEED, WITHOUT CONNECTORS, SPLASHPROOF
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$3,213.94
    CAN$3,213.94
    Repair Yours CAN$2,642.52
    NIDEC CORP DXM-208C-090

    NIDEC CORP

    CONTROL TECHNIQUES

    DXM-208C-090

    DISCONTINUED BY MANUFACTURER, SERVO MOTOR, 3 PHASE, 3 AMP, 240 VAC, 0.47HP / 0.35KW, 5000 RPM
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$1,970.03
    CAN$1,970.03
    Repair Yours CAN$1,218.17
    NIDEC CORP DCM6F3014A2

    NIDEC CORP

    CONTROL TECHNIQUES

    DCM6F3014A2

    DISCONTINUED BY MANUFACTURER, MATADOR DC SERVO MOTOR, FOR USE WITH MAE
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$2,012.74
    CAN$2,012.74
    Repair Yours CAN$1,408.94
    NIDEC CORP DCM2B3003A2

    NIDEC CORP

    CONTROL TECHNIQUES

    DCM2B3003A2

    DISCONTINUED BY MANUFACTURER, MATADOR DC SERVO MOTOR FOR USE WITH MAE, 3000 RPM, STALL TORQUE 0.32 NM, 4.45 AMP
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$763.97
    CAN$763.97
    Repair Yours CAN$603.54
    NIDEC CORP SE51

    NIDEC CORP

    CONTROL TECHNIQUES

    SE51

    DISCONTINUED BY MANUFACTURER, OPTION BOARD, BIPOLAR, SPEED REFERENCE, COMMANDER, CE
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$109.56
    CAN$109.56
    NIDEC CORP MIC-8208-B

    NIDEC CORP

    CONTROL TECHNIQUES

    MIC-8208-B

    DISCONTINUED BY MANUFACTURER, SERVO CONTROL MODULE, STEPPER MOTOR CONTROL, PANEL MOUNT, W/ FRONT I/O
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$1,706.93
    CAN$1,706.93
    Repair Yours CAN$1,340.30
    EMERSON T-60

    EMERSON

    CONTROL TECHNIQUES

    T-60

    DISCONTINUED BY MANUFACTURER, OPERATOR INTERFACE TERMINAL, 30 MA, 30 V DC
    Buy Surplus As Low As CAN$3,523.27
    CAN$3,523.27
    Repair Yours CAN$1,971.27
    NIDEC CORP DXA-780

    NIDEC CORP

    CONTROL TECHNIQUES

    DXA-780

    DISCONTINUED BY MANUFACTURER, SERVO DRIVE, POSITIONING, 120 VAC, 50/60 HZ INPUT, SHUNT FUSE, BRIDGE FUSE
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$4,239.41
    CAN$4,239.41
    Repair Yours CAN$3,504.02
    NIDEC CORP DXA-430

    NIDEC CORP

    CONTROL TECHNIQUES

    DXA-430

    DISCONTINUED BY MANUFACTURER, SERVO DRIVE, POSITIONING, 120 VAC, 50/60 HZ INPUT, SHUNT FUSE, BRIDGE FUSE, PART NUMBER: 850016-11
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$1,419.09
    CAN$1,419.09
    Repair Yours CAN$967.94
    NIDEC CORP 2950-8400

    NIDEC CORP

    CONTROL TECHNIQUES

    2950-8400

    DISCONTINUED BY MANUFACTURER, DRIVE, 10HP, 3 PHASE, 460VAC, 50/60HZ
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$644.49
    CAN$644.49
    Repair Yours CAN$476.91
    NIDEC CORP 2950-8003

    NIDEC CORP

    CONTROL TECHNIQUES

    2950-8003

    DISCONTINUED BY MANUFACTURER, AC DRIVE, PRISM, 480 VAC, 8.4 A, 50/60 HZ, 3 PHASE, MAX AC OUT: 460 VAC, 8.8 A, 5 HP, 4.84 KW, 6-120 HZ, 7.01 KVA.
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$865.37
    CAN$865.37
    Repair Yours CAN$630.10
    NIDEC CORP 2600-4005

    NIDEC CORP

    CONTROL TECHNIQUES

    2600-4005

    DISCONTINUED BY MANUFACTURER, DRIVE BOARD, RELAY OUTPUTS, SCREW TERMINALS, WITH CARD-SIDE ADJUSTABLE POTENTIOMETER
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$525.90
    CAN$525.90
    Repair Yours CAN$366.73
    NIDEC CORP UNI1405VTC

    NIDEC CORP

    CONTROL TECHNIQUES

    UNI1405VTC

    DISCONTINUED BY MANUFACTURER, DRIVE, 5 HP, 4 KW, 9.5 AMP, 380-480 VAC, 3 PHASE, UNIDRIVE, VARIABLE TORQUE
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$12,358.56
    CAN$12,358.56
    Repair Yours CAN$5,957.87
    NIDEC CORP UD77-DN

    NIDEC CORP

    CONTROL TECHNIQUES

    UD77-DN

    DISCONTINUED BY MANUFACTURER,COMMUNICATION APPLICATION COPROCESSOR, UNIDRIVE DEVICENET INTERFACE
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$4,931.29
    CAN$4,931.29
    Repair Yours CAN$3,180.00
    NIDEC CORP MGE-490-CONS-0000

    NIDEC CORP

    CONTROL TECHNIQUES

    MGE-490-CONS-0000

    SERVO MOTOR, MG FAMILY, ENGLISH MOUNTING FLANGE, 4" FRAME, 100 LB.-IN. CONT. TORQUE, 10.3/45 AMPS (CONT./PEAK), 3000 RPM, MS CONNECTOR, W/O BRAKE, ENCODER FEEDBACK TYPE, STANDARD SHAFT SEAL, ...
    ✓ IN STOCK!
    CAN$11,203.96 Buy Surplus As Low As CAN$6,925.35
    CAN$6,925.35
    Repair Yours CAN$2,887.92
    NIDEC CORP MAXI-MAESTRO-200X25/50

    NIDEC CORP

    CONTROL TECHNIQUES

    MAXI-MAESTRO-200X25/50

    DISCONTINUED BY MANUFACTURER, VARIABLE SPEED DRIVE, FOR PERMANENT MAGNET DC SERVO MOTORS, WITH PLUG IN PERSONALITY BOARD, 3 PHASE SUPPLY, 150 V, 212 VDC / 150 VAC OUTPUT, 25 AMP, 5 KW
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$4,559.10
    CAN$4,559.10
    Repair Yours CAN$2,388.00
    NIDEC CORP DXM4120C

    NIDEC CORP

    CONTROL TECHNIQUES

    DXM4120C

    DISCONTINUED BY MANUFACTURER, SERVO MOTOR, 4.25HP, 3000RPM, 240VAC, 16AMP
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$2,390.38
    CAN$2,390.38
    Repair Yours CAN$1,680.40
    NIDEC CORP DX-202

    NIDEC CORP

    CONTROL TECHNIQUES

    DX-202

    SERVO DRIVE
    ✓ IN STOCK!
    CAN$4,800.28 Buy Surplus As Low As CAN$2,880.75
    CAN$2,880.75
    Repair Yours CAN$2,032.85
    NIDEC CORP ALP-130

    NIDEC CORP

    CONTROL TECHNIQUES

    ALP-130

    DISCONTINUED BY MANUFACTURER, POWER SUPPLY, AUXILIARY, INPUT: 340/170 MA, 1 PHASE 120/240 VAC 50/60 HZ, OUT: 170 MA 140 VDC, 960507-03
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$215.21
    CAN$215.21
    Repair Yours CAN$371.18
    NIDEC CORP MAXAX-200

    NIDEC CORP

    CONTROL TECHNIQUES

    MAXAX-200

    DISCONTINUED BY MANUFACTURER, BRUSHLESS AC SERVO DRIVE, 3.0 KVA INPUT POWER, 220 VAC, 3 PHASE, 50/60 HZ, 10 AMP, OUTPUT-2KW POWER, 220 VAC, 7.0 AMP
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$1,903.31
    CAN$1,903.31
    Repair Yours CAN$1,297.69
    NIDEC CORP MAXAX-100/3000

    NIDEC CORP

    CONTROL TECHNIQUES

    MAXAX-100/3000

    DISCONTINUED BY MANUFACTURER, SERVO DRIVE, BRUSHLESS, 3 PHASE, INPUT: 1.5 KVA / 220 VAC (50/60 HZ) / 7 AMP, OUTPUT: 1 KW / 220 VAC / 4.5 AMP, OVERLOAD 10 AMP FOR 2 SECONDS
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$1,230.95
    CAN$1,230.95
    Repair Yours CAN$948.00
    NIDEC CORP LX-400

    NIDEC CORP

    CONTROL TECHNIQUES

    LX-400

    DISCONTINUED BY MANUFACTURER, BRUSHLESS AC SERVO DRIVE, 220 VAC INPUT, 4.5 AMP OUTPUT, CPS001
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$996.97
    CAN$996.97
    Repair Yours CAN$680.15
    NIDEC CORP FX-340

    NIDEC CORP

    CONTROL TECHNIQUES

    FX-340

    DISCONTINUED BY MANUFACTURER, UNIDRIVE SP, WITHOUT KEYPAD, 230 VAC, MAXCONT OUTPUT CURRENT (HP): NORMAL DUTY - 104A (40HP), HEAVY DUTY - 80A (30HP)
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$2,020.92
    CAN$2,020.92
    Repair Yours CAN$1,548.00
    NIDEC CORP FX-208

    NIDEC CORP

    CONTROL TECHNIQUES

    FX-208

    DISCONTINUED BY MANUFACTURER, SERVO DRIVE, 172 AMP, 50 HP, 230/460 VAC, 60 HZ
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$2,103.08
    CAN$2,103.08
    Repair Yours CAN$1,548.00
    NIDEC CORP EN-208-00-000

    NIDEC CORP

    CONTROL TECHNIQUES

    EN-208-00-000

    DISCONTINUED BY MANUFACTURER, SERVO DRIVE, FOR XV SERVO MOTOR, 1/3 PHASE, 240 VAC INPUT, 50/60 HZ, 15.5 A RMS, 240 VAC OUTPUT, 0-900 HZ, 9.0 A RMS
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$5,926.83
    CAN$5,926.83
    Repair Yours CAN$2,268.00
    NIDEC CORP NTE-212-TONS-0000

    NIDEC CORP

    CONTROL TECHNIQUES

    NTE-212-TONS-0000

    SERVO MOTOR, NT SERIES, 230 VAC, 50/60 HZ, ENGLISH FLANGE, 2 IN FRAME, 12.5 LB-IN / 1.4 NM, 5000 RPM, 2.7 AMP, 0.74 KW, IP65, MS STYLE CONNECTOR ON FLYING LEADS, UNBRAKED, 2048 PPR ENCODER, ...
    ✓ IN STOCK!
    CAN$3,980.52 Buy Surplus As Low As CAN$1,776.37
    CAN$1,776.37
    Repair Yours CAN$1,264.26
    NIDEC CORP MX-1600-CE

    NIDEC CORP

    CONTROL TECHNIQUES

    MX-1600-CE

    DISCONTINUED BY MANUFACTURER, MENTOR II DRIVE, 125 HP @ 208-240VAC INPUT, 250 HP @ 380-480VAC INPUT, REGEN"
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$3,700.76
    CAN$3,700.76
    Repair Yours CAN$2,081.27
    NIDEC CORP DB44P-SA

    NIDEC CORP

    CONTROL TECHNIQUES

    DB44P-SA

    KIT, 45, CONNECTOR FOR COMMAND
    ✓ IN STOCK!
    CAN$103.53 Buy Surplus As Low As CAN$53.36
    CAN$53.36
    NIDEC CORP 8200-00155E

    NIDEC CORP

    CONTROL TECHNIQUES

    8200-00155E

    DISCONTINUED BY MANUFACTURER, DYNAMIC BRAKING RESISTOR, 178.9 OHMS, 250 WATTS, 150% E-STOP BRAKING TORQUE
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$315.86
    CAN$315.86
    Repair Yours CAN$373.14
    NIDEC CORP UD52

    NIDEC CORP

    CONTROL TECHNIQUES

    UD52

    DISCONTINUED BY MANUFACTURER, SIN-COS ENCODER MODULE, SMALL OPTION FOR UNIDRIVE, OPERATES WITH ENCODERS: 256; 512; 1024, 2048 OR 4096 LINES PER REVOLUTION
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$865.80
    CAN$865.80
    Repair Yours CAN$590.30
    NIDEC CORP SP1401

    NIDEC CORP

    CONTROL TECHNIQUES

    SP1401

    DISCONTINUED BY MANUFACTURER, DRIVE, UNIDRIVE, WITHOUT KEYPAD, 3 PHASE, 380-480 VAC, NORMAL DUTY - 2.8 AMP (1.5HP), HEAVY DUTY - 2.1 AMP (1HP), SIZE 1
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$2,241.93
    CAN$2,241.93
    Repair Yours CAN$1,548.00
    NIDEC CORP 8200-00050

    NIDEC CORP

    CONTROL TECHNIQUES

    8200-00050

    DISCONTINUED BY MANUFACTURER,DYNAMIC BRAKING RESISTOR,40 OHM,4334 W,
    ✓ IN STOCK!
    CAN$2,073.79 Buy Surplus As Low As CAN$976.20
    CAN$976.20
    NIDEC CORP F3N5E

    NIDEC CORP

    CONTROL TECHNIQUES

    F3N5E

    DISCONTINUED BY MANUFACTURER, DC DRIVE, 3-5 HP, 35 VAC INPUT, 180 DC OUTPUT
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$721.14
    CAN$721.14
    Repair Yours CAN$592.93
    NIDEC CORP DXE-450

    NIDEC CORP

    CONTROL TECHNIQUES

    DXE-450

    DISCONTINUED BY MANUFACTURER, DX SERVO MOTOR, 230VAC, 3 FRAME, ENGLISH MOUNTING FLANGE, 16 IN-LBS CONT. TORQUE, 4000 RPM MAX SPEED
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$1,986.41
    CAN$1,986.41
    Repair Yours CAN$1,469.91
    NIDEC CORP DXE-4120W

    NIDEC CORP

    CONTROL TECHNIQUES

    DXE-4120W

    DISCONTINUED BY MANUFACTURER, SERVO MOTOR, BRUSHLESS, 3 PHASE, 240 VAC, 16.0 AMPS, 3.17 KW / 4.25 HP, 3000 RPM, CLASS F, (960128-01)
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$8,343.16
    CAN$8,343.16
    Repair Yours CAN$3,902.37
    NIDEC CORP DCD60X7/14

    NIDEC CORP

    CONTROL TECHNIQUES

    DCD60X7/14

    DISCONTINUED BY MANUFACTURER, SERVO DRIVE, MINI MAESTRO, 7 AMP, 20-80 VDC, (7.31.806)
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$1,027.46
    CAN$1,027.46
    Repair Yours CAN$687.60
    NIDEC CORP 6180-4025

    NIDEC CORP

    CONTROL TECHNIQUES

    6180-4025

    DRIVE DSI IO
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$1,343.90
    CAN$1,343.90
    Repair Yours CAN$840.07
    Previous Next
    4 5 6 7 8 9 10 11 12 13 14